Description Hall Table

Serial No 0818 11 Series 400

Design Table is individual and unique design hand made in Tasmania. Legs are removable to simplify transport. When re-installing legs, ensure that V-marks on underside coincide. Legs will only fit one way.

Construction Table top is constructed in alternate blackwood, celery pine, silky oak, Huon pine, silky oak, celery pine and blackwood. Frame is blackwood. Legs are myrtle. Table is all solid naturally grown Tasmanian timbers (no veneer). Underside corners are heavily reinforced to ensure extra strength.

Table top is attached with sliding fixture on one side to allow expansion and contraction due to temperature / humidity changes without cracking the timber.

Finish There are no coloured wood stains used - only oil and wax. The table is finished in three coats of Scandinavian Oil. The top is further polished with natural Traditional Wax.

Dimensions Top is 645mm wide, 340mm front to back. The top is 780mm above floor level. Overall maximum size is 410mm by 645mm. With legs removed table may be packed 410 x 780 x 150.

Taking care of your table Wipe over with a clean dry cloth. If finish ever need rejuvenating, apply a light coat of wax polish and polish with dry cloth. Keep out of direct sunlight as much as possible and keep dry. Over time the colour of the timber will change - this is normal. With proper care this desk should last at least a lifetime.